Custom Piezo Motors

DSM designs and manufactures custom motors. See some examples below. Contact us today to discuss your application.

salesinfo@dynamic-structures.com

DSM Model I-90 Piezo Motor

Total macro stroke: 25 mm (0.98 in). Actual value is determined by motor design. Designs can be configured for increased travel.
Motion resolution: Sub-micron step capability- using micro stepping driver
Dimensions: Approximately 63 mm x 57 mm x 18mm (2.5in x 2.3in x 0.7in) depending on force specification.
Motor speed: Up to 30 mm/sec depending upon the motor architecture and driving frequency.
Output force: 90 N (20.2 lb)


DSM Model CS-12-60 Piezo Motor Specifications

Total macro stroke: Typically 3 to 25 mm. Actual value is determined by motor design. Designs can be configured for increased travel.
Motion resolution: Sub-micron step capability- using micro stepping driver.
Dimensions: Approximately 17 mm x 29 mm x 30 mm (0.67 in x 1.14 in x 1.18 in) depending on force specification.
Motor speed: Up to 30 mm/sec depending upon the motor architecture and driving frequency.
Output force: Force levels for current models range between 20 N to 100 N (5 to 22 lbf) depending on motor frame size and piezoelectric size. The motor can be configured for power-off slip or power-off hold.


DSM Model I-30 Piezo Motor Specifications

Total macro stroke: 10 mm (0.4 in). Actual value is determined by motor design. Designs can be configured for increased travel.
Motion resolution: Sub-micron step capability- using micro stepping driver.
Dimensions: Approximately 24 mm x 14 mm x 48 mm (0.95 in x 0.55 in x 1.89 in) depending on force specification.
Motor speed: Up to 30 mm/sec depending upon the motor architecture and driving frequency.
Output force: 30 N (6.7 lb). The motor can be configured for power-off slip or power-off hold.


DSM Model PS3-UL Piezo Motor Specifications

Total macro stroke: 3 mm (0.12 in). Actual value is determined by motor design. Designs can be configured for increased travel.
Motion resolution: Sub-micron step capability- using micro stepping driver.
Dimensions: Approximately 44 mm x 29 mm x 15mm (1.7 in x 1.1 in x 0.6 in) depending on force specification.
Motor speed: Up to 80 mm/sec depending upon the motor architecture and driving frequency.
Output force: 50 N (11 lb). The motor can be configured for power-off slip or power-off hold.


DSM Model SQ-150 Piezo Motor Specifications

Total macro stroke: 5 mm (0.2 in). Actual value is determined by motor design. Designs can be configured for increased travel.
Motion resolution: Sub-micron step capability- using micro stepping driver.
Dimensions: Approximately 36 mm x 36 mm x 71 mm (1.4in x 1.4 in x 2.8 in) depending on force specification.
Motor speed: Up to 150 mm/sec depending upon the motor architecture and driving frequency.
Output force: 151 N (34 lb). The motor can be configured for power-off slip or power-off hold.